EXW2
For Allrounders - EXW2
Braunschweig
3 Days
German
The three-day training course, while dealing with the subject matter of the EXW1 course, lets trainees share hands-on maintenance experience for PROTEGO® Protective Systems in the Academy's workshop (day 3).
1.520€
BraunschweigInfos & Documents
- especially for design engineers, operations engineers, safety representatives, occupational health and safety specialists
- Safety fundamentals and typical applications.
- Demonstration tests at the PROTEGO® Research and Development Centre to establish a detailed and better understanding.
- Hands-on maintenance of PROTEGO® valves and flame arresters on key models ( detonation arrester Arrête-flammes antidétonation Flame arrester designed to prevent the transmission of a detonation. , pressure and vacuum Dépression Vacuum is the pressure in an enclosed space that is lower than the ambient pressure. relief pallet valve, pressure and vacuum relief diaphragm Membrane A diaphragm is a thin layer of material, which has a large surface area. valve).
- Setting and measuring of set pressure Pression de réponse Set pressure is the gauge pressure at the device inlet at which the relief device is set to start opening under service conditions. and leakage rates on the test bed.
- Trainees to acquire competence and expert knowledge as persons qualified in explosion protection Protection antidéflagrante An explosion protection is a flame arrester that prevents flame propagation into plant sections to be protected during explosions. with specific regard to Protective Systems; where applicable, introduce trainees to the approach to design and sizing of PROTEGO® Valves and Flame Arresters. Informing trainees about safety-related basics and instructing them on how to use the operating instructions.
- Trainees to acquire competence and expert knowledge as persons qualified in explosion protection pursuant to German Industrial Safety Ordinance (BetrSichV) § 14 Subs 1 3 and § 15 as well as TRBS (German Technical Rules for Operational Safety) for protective systems for use as intended in hazardous areas.
- Officially recognised continuation course for immission control and incidents prevention officers pusuant to § 7 No. 2 of No. 5 Federal Immission Control Ordinance (BImSchV).
- 2 VDSI points for safety at work / 3 VDSI points for fire protection.
Your way to us
Braunschweiger Flammenfilter GmbH
Industriestr. 11
38110 Braunschweig, Deutschland
Course Description
Upcoming Seminar Dates
Sign-up
Please bear in mind that, given the strong demand, booking can only be made on the basis of an official order including the invoicing address and your order No.
Unless an order has been received, pre-booking (e.g. by email) if any will not be considered!