DA-E

Name: DA-E
Brand: PROTEGO
SKU: product328880540610

Eccentric In-Line Detonation Flame Arrester for stable detonations and deflagrations in a straight through design, bidirectional

Solicitar presupuesto Encontrar persona de contacto

Características

Diseño excéntrico

Evita la acumulación de condensados

Diseño modular

Permite la sustitución y limpieza de los discos de filtro FLAMEFILTER® de forma individual

Montaje y desmontaje más rápido

de un único disco de filtro FLAMEFILTER®

Diseño compacto

Facilita la instalación cerca de suelos y paredes

Transmisión bidireccional de la llama

Diseño de pruebas

Seguridad frente a explosiones

Proporciona protección contra deflagraciones y detonaciones estables

Posibilidad de instalar sensores de temperatura

Es posible el uso de sensores de temperatura para G 1½ y G 2

Piezas de recambio

Piezas de recambio eficientes en costes

Función y descripción

Eccentric Design

The PROTEGO® DA-E Series of Detonation Detonation Explosion, die sich mit Überschallgeschwindigkeit fortpflanzt, gekennzeichnet durch eine Stoßwelle. Arresters are distinguished by its eccentric housing shape. When condensate accumulates within the PROTEGO® Flame Arrester Unit, the design allows the liquid to drain without collecting large amounts in the housing. The eccentric design of the device has distinctive advantages over the classic Flame Arresters when installed at lower depths.

Main Component – PROTEGO® Flame Arrester Unit

The detonation arrester is symmetrical and offers bi-directional flame arresting. The arrester essentially consists of two housing parts (1) and the PROTEGO® Flame Arrester Unit (2) in the center. The PROTEGO® Flame Arrester Unit consists of several FLAMEFILTER® discs (3) and spacers firmly held in a FLAMEFILTER® casing. The number of FLAMEFILTER® discs and their gap size depends on the arrester‘s intended use. By specifying the operating conditions, such as the temperature, pressure, explosion group, and the composition of the fluid, the optimum detonation arrester can be selected.

For Explosion Groups IIA to IIB3

The PROTEGO® DA-E Series of Flame Arresters are available for explosion groups IIA to IIB3 (NEC Group D to C MESG ≥ 0.65 mm). The standard design can be used with an operating temperature of up to +60°C / 140°F and an absolute operating pressure acc. to table 3. Devices with special approval for higher pressures and higher temperatures are available upon request. Type-approved in accordance with the current ATEX Directive and EN ISO 16852, as well as other international standards.

Get in Touch

Any questions? Contact our engineers.

Contact

Datos del producto

Dimensiones

To select the nominal size (DN), please use the flow capacity charts on the following pages

25 / 1"

32 / 1¼“

40 / 1½“

50 / 2"

65 / 2½“

80 / 3"

100 / 4"

125 / 5"

150 / 6"

200 / 8"

250 / 10"

300 / 12"

Expl. Gr.

IIA

304 / 315*

320 / 12.60

325 / 12.80

370 / 14.57

375 / 10.83

380 / 14.96

481 / 18.94

487 / 19.17

510 / 20.08

540 / 21.26

560 / 22.05

IIB3

304 / 11.97

357 / 14.06

361 / 14.21

408 / 16.06

412 / 16.22

428 / 16.85

493 / 19.41

499 / 19.65

522 / 20.55

552 / 21.73

572 / 22.52

29 / 1.14

38 / 1.49

39 / 1.53

65 / 2.56

55 / 2.17

58 / 2.28

60 / 2.36

185 / 7.28

210 / 8.27

250 / 9.84

275 / 10.83

385 / 15.16

450 / 17.72

500 / 19.69

575 / 22.64

400 / 15.75

410 / 16.14

440 / 17.32

460 / 18.11

520 / 20.47

540 / 21.26

570 / 22.44

600 / 23.62

Dimensiones en mm / pulgadas

* for IIA-P2.0

Selección de materiales para la vivienda

Design	B	C	D
Housing	Steel	Stainless Steel	Hastelloy
Gasket	PTFE	PTFE	PTFE
Flame arrester unit	A, C	C	D

The housing is also available in carbon steel with an ECTFE coating.

Special materials upon request

Combinación de materiales para la unidad apagallamas

Design	A	C	D
FLAMEFILTER^® cage	Steel	Stainless Steel	Hastelloy
FLAMEFILTER^®*	Stainless Steel	Stainless Steel	Hastelloy
Spacer	Stainless Steel	Stainless Steel	Hastelloy

* the FLAMEFILTER® are also available in the materials Tantalum, Inconel, Copper, etc. when the listed housing and cage materials are used.

Special materials upon request

Selección del grupo de explosión

MESG	Expl. Gr. (IEC / CEN)	Gas Group (NEC)
> 0,90 mm	IIA	D
≥ 0,65 mm	IIB3	C

Special approvals upon request

Selección de la máxima presión de operación

Expl. Gr.

25 / 1"

32 / 1¼"

40 / 1½"

50 / 2"

65 / 2½"

80 / 3"

100 / 4"

125 / 5"

150 / 6"

200 / 8"

250 / 10"

300 / 12"

IIA

Pmax

2,0 / 29.0

1,2 / 17.4

IIB 3

Pmax

1,1 / 15.9

1,2 / 17.4

Pmax = Maximum allowable operating pressure in bar / psi absolut, higher operating pressure upon request

Especificación de la máx. temperatura de operación

≤ 60°C / 140°F	Tmaximum allowable operating temperature in °C
-	Designation

higher operating temperatures upon request

Tipo de bridas de conexión

EN 1092-1; Form B1

ASME B16.5 CL 150 R.F.

other types upon request

Modelo y especificación

There are three different designs available:

Basic design of the detonation arresterDA-E- –

In-line detonation flame arrester with integrated temperature sensor* as additional protection against short time burning of one sideDA-E- T

Detonation arrester with two integrated temperature sensors* as additional protection against short time burning from both sidesDA-E- TB

Additional special arresters upon request
*Resistance thermometer (Ex i II 1/2 G Ex ia IIC T1…T6 Ga/Gb)

Diagrama de flujo volumétrico

Los diagramas de flujo volumétrico han sido determinados con un banco de pruebas de caudal calibrado y certifi - cado por TÜV. El flujo volumétrico V. en [m³/h] y el CFH se refi eren a las condiciones estándar de referencia de aire según ISO 6358 (20°C, 1bar). La conversión a otras densidades y temperaturas están referidas en el Vol. 1: “Fundamentos Técnicos”.